7.2 Security password of calibration (Code)
Select the Code (password) icon after entering calibration setup mode. Select to activate code
function or not.
The default Calibration setting code is “1100”.
Enter “TECH, NIST, Any” Calibration
If you input a wrong code, then
the display shows “Error Code”
message. Press
to input another code, or press
to exit the calibration
menu.
The first ‘0” of digits ‘0000” start
to twinkle. Press or to
adjust the value, and then press
to confirm it and continually key
in the next digit, and so on.
Press to confirm it.
Press to confirm it.
Press to confirm it.
(Select to turn on or turn off
code protection function. If
you select turn on, please key
in a new code. There will be a
code requirement showing in
display when you re-enter to
the setup mode. Key in the
correct password to enter into
calibration setup menu.)
Input new code
Press to confirm it.
Press to confirm it.
Press or
Summary of Contents for TX2000
