ORT/RWT/SGR Series Transducer - CAN Bus Interface (RWT3536IM)
Revision 6, February 2021 - Page 8
Transducer Control
Transducer Control can be used to customise the message identifiers, baud rate, data
format, and output rate of the CAN bus interface.
To customise the settings, power on the transducer and connect the USB lead to a
PC.
Run the Transducer Control program by clicking on the Start/Windows button, then
“Sensor Technology” > “Transducer Control 5”.
Once the program has loaded, a “Search for connected transducers” dialog box will be
shown. Select “AUTO USB” from the “Select Port To Search” list and click “Search”.
The purpose of this dialog box is to search for transducers for use with Transducer
Control. Once the search is complete, the program will automatically load the
discovered transducer, if more than one transducer is discovered, a list will be shown
for selection.
To load the CAN configuration page, select
“Transducer Configuration” > “User
Configuration
” from the menu bar. On the resulting window, select the “Digital Setup”
tab, followed by the “CAN Bus” tab.
