44
LAM71, Release 001_Revision 001
7
Serial interface and communication software
Transmittion protocol
•
Interface settings: Asynchronous, 8 data bits, no parity, 1 stop bit
•
Transmission protocol format / syntax: 7 bit ASCII
•
Proprietary transmission protocol
•
Commands are case-insensitive (NO differentiation between lower and upper case).
•
Decimal separ
ator in the output of figures is the dot “.” (0x2E).
•
The terminator of a command (sending command) is ENTER (0x0D, 0x0A) or Carriage Return
(0x0D) or Line Feed (0x0A)
•
Where parameters have several values, they are separated by a space (0x20).
•
The response to commands with parameters is the respective command including the parame-
ters.
•
The response to commands without parameters is the respective command including the cur-
rent parameters.
•
The response to commands with parameters outside of the valid value range is the respective
command including the current parameters.
•
The response to unknown commands and faulty p
arameter formats is a “?” (0
x3F).