sensonor STIM202, User Manual

Page: 4 / 22

USER MANUAL EvaluationTool
STIM202 Evaluation Kit
DOK333 rev.06 4/22 Dec 2017
5 System requirements

Windows XP SP2 (or later), Windows Vista, Windows 7 (32/ 64bit)

1 free USB port and 1 free PCI slot for the PCI kit

2 free USB ports for the USB kit

Quad core processor recommended (when simultaneously logging data from two gyro modules)
6 Getting started
Two separate software installations are required:

NI serial driver installation

PC software installation
6.1 Installation of NI serial driver
Install the National Instruments (NI) serial driver from the CD-ROM included in the kit. This process is self-instructive.
Follow the on-screen messages without doing any configuration changes.
Figure 3 and Figure 4 show two of the messages that appear during serial driver installation.
The NI serial driver can also be found from the
Sensonor support site . Use this site to regularly check for updates.
Figure 3: NI serial driver installation. Start Installation