VizComm
™
F4 Bundle Activation Guide
Activating the VizComm F4
1. Locate the loose red/black lead from the battery.
2. Locate the loose red/black lead from the Tracking device.
3. Match the orientation of the connectors and attach.
F4 will activate with battery power. (Solid
GREEN
lights, followed by 4 flashes, then out)
4. Tuck leads into case and then close case (make sure leads are not being pinched when closing).
Turning On the VizComm F4
1. Power on by lightly pressing then releasing the crosshairs button (A).
2. LED Lights (B) will be solid
GREEN
for 4 seconds then will flash indicating the device is powered up.
Turning Off the VizComm F4
1. Power off by pressing the crosshairs button for 4 seconds.
2. LED lights will flash
RED
. Release button as device powers off (3-5 seconds.)
Check Status
Tap the crosshairs button to check cell signal strength (C) and battery (D).
If the LED lights display solid
GREEN
then flash 4 times, the device was
powered off and is now on.
GREEN
— >90% battery left
AMBER
— 50-90% battery left
RED
— < 50% battery left
1
2
A
B
3
4
C
D
