background image

 

Delivery

Each delivery contains the following unless otherwise agreed by the customer: 

 

 

Sensor according to purchase order

 

 

Instruction Manual, including Guarantee Certificate

 

 

Delivery Note

 

Complaints and repairs: 

Guarantee  and  after

-

guarantee  repairs  of  sensors  are  ensured  by  the  manufacturer.  The  product  must  be  delivered 

including  a  copy  of  the  Guarantee  Certificate,  duly  packed  and  fit  to  shipment  so  as  not  to  get  damaged  during 

transportation.

 

GUARANTEE CERTIFICATE 

The product is covered by guarantee for 24 months from the date of purchase.

 

In  this  period,  the  manufacturer  will  remove  all  material  or  manufacturing  defects  arisen  demonstrably  during  the 

applicable warranty period. The manufacturer is liable for the technical and operational parameters of the product given 

in the user manual. Any identified defects will be claimed by the buyer without undue delay after their identification or, as 

appropriate, after the buyer was able to identify them during his routine care. A completed Warranty Certificate with a 

brief description of

 

the defect plus the product must be submitted with the claim. 

 

Warranty does not cover a product: 

 

That was damaged during transport and inappropriate storage, improper commissioning and/or that has been used for 

a purpose other than specified

 

 

That has been used in an improper manner, inconsistent with the user manual and/or generally applicable technical 

standards or safety regulations 

 

 

That is worn or damaged as a result of normal use of the product, without loss of its operational characteristics and 

guaranteed technical parameters

 

 

Into  which  unskilled  intervention,  unauthorised  structural  or  other  changes  (reprogramming,  resetting  of  set 

parameters, etc.) have been made

 

 

That is mechanically damaged, e.g. by fall, being hit by a hard object, cleaning with

 

unsuitable agents, power cord 

tearing/breaking, breaking or other damage of individual product parts

 

 

That  has  been  exposed  to  adverse  external  influence,  e.g.  object  intrusion,  wrong  supply  voltage,  influence  of 

chemical  processes,  electrical  surge  (obviously  burnt  components  or  printed  circuits),  dusty,  dirty,  aggressive  or 

otherwise unsuitable environment, except normal variation

 

 

That has been damaged by an incidental or natural disaster or as a result of natural or external phenomena,

 

such as 

storm, fire, water, excessive heat

 

 

That is claimed without the Warranty Certificate or nameplate.

 

R

ights and obligations regarding the rights arising from defective performance will be governed by the applicable 

legislations and the applicable Business Terms and Conditions of SENSIT s.r.o. and this Warranty Certificate

.

 

Date of sale confirmation:

 

Serial number:  

 

Summary of Contents for DS 150B

Page 1: ...rporated in the Companies Register at the Regional Court in Ostrava Section C File 13728 sensit sensit cz www sensit cz 2992 2 10 20 Supersede 2991 1 INSTRUCTION MANUAL TEMPERATURE SENSOR DS 150B DS 18B20 2 x DQ Temperature sensor with cable for contact temperature measurements on the surface of the pipes and tubes in the range of 40 to 105 C ...

Page 2: ...line on a surface The minimum pipe diameter is 20 mm Operating position is arbitrary sensor dimensions enables its location under the insulation on pipes Warnings and restrictions The sensors must not be used for measuring in locations Where the specified technical parameters and operating conditions are not adhered Where the sensor is exposed to mechanical action With explosion hazard For measuri...

Page 3: ...4 After installation and connection to the consequential electrical measuring device the sensor is ready for operation The sensor does not require any special manipulation or maintenance Wiring diagram Technical parameters Type of element Dallas DS18B20 Accuracy class of element 0 5 C in range 10 to 80 C Temperature element wiring Three wire 2x signal DQ Measuring range 40 C to 105 C Power supply ...

Page 4: ...g and or that has been used for a purpose other than specified That has been used in an improper manner inconsistent with the user manual and or generally applicable technical standards or safety regulations That is worn or damaged as a result of normal use of the product without loss of its operational characteristics and guaranteed technical parameters Into which unskilled intervention unauthori...

Reviews: