ZigBee Wireless Analog Input Transmitter (AIZ100)
Model No.: AIZ100
Externally connect to three sets of analog signals
DC IN
（
Power supply port
）
SMA
（
Antenna connector
）
FUNC
（
Mode-switchover button
）
LED Green
LED Red
8-pin socket
2 dBi Omni-directional antenna
Communication Mode
1. Ensure that the wireless coordinator is under communication mode status.
2. Build up the wireless transmitter and detecting device.
3. Turn on power; the LED Green flashes for three times; then, the LED Red flashes and extinguishes; now the
LED Green becomes constantly light-on to enter the communication mode.
4. During the communication process, LED Red flashes when transmitting signals.
Setting Mode
1. Prior to transmitter setting, complete the wireless coordinator setting procedure first.
2. Press and hold the FUNC button of transmitter and turn on the power. After the LED Green flashes for three
times and the LED Red lights up, release the FUNC button and enter the setting mode operation.
3. During the setting mode, the LED Green lights on constantly and LED Red flashes.
4. Follow the
《
ZigBee Setting Software Operation Manual (D)
》
to perform group setting.
5. While making module software setting, the setting of (A/D Range) shall be identical to the Jump setting.
(Refer to Attachment D-1.)
6. After setting work is done, unplug & plug the power cable to enter the communication mode.