ZigBee Soil Moisture Sensor (MDP100)
Model No.: MDP100
RJ11 transmission interface
Power switch
Belt clamp
FUNC
（
Mode-switchover button
）
Emergency pushbutton
Hidden LED Blue
Hidden LED Red
Humidity sensing conductor
Communication mode
1. Ensure that the wireless coordinator is under communication mode status.
2. Build up the wireless transmitter and detecting device.
3. Turn on power; the LED Red flashes for four times; then, the LED Blue flashes and extinguishes; when both
the LED Red & Blue becomes light-off it now enters the communication mode.
4. During the communication process, LED Blue flashes when transmitting signals.
Setting mode
1. Prior to transmitter setting, complete the wireless coordinator setting procedure first.
2. Press and hold the FUNC button of coordinator and turn on the power. After the LED Red flashes for three
times and the LED Blue lights up, release the FUNC button and enter the setting mode operation.
3. During the setting mode, the LED Red constantly lights up and LED Blue flashes.
4. Follow the
《
ZigBee Setting Software Operation Manual (D)
》
to perform group setting.
5. After setting work is done, turn on the power and enter the communication mode.