Gilian
®
BDX
II
ABATEMENT AIR SAMPLING PUMP
Document No. 801863M (Rev A)
7
READ AND UNDERSTAND ALL WARNINGS BEFORE USE
Read and understand ALL warnings before using this product. Failure to read, understand, and
comply with ALL warnings could result in property damage, severe personal injury, or death.
Read and understand ALL applicable Federal, State, and Local environmental health and safety
laws and regulations, including OSHA. Ensure complete compliance with ALL applicable laws and
regulations before and during use of this product.
UNDER NO CIRCUMSTANCES should this product be used except by qualified, trained,
technically competent personnel and not until the warnings,
Operation and Service Manual, labels,
and other literature accompanying this product have been read and understood.
The
Operation and Service Manual must be read and understood by each user before operating
this product or using its accessories, in order to ensure proper and safe use and installation of this
product and to ensure familiarity with the proper treatment and safety procedures in the event of
an accident.
DO NOT remove, cover, or alter any label or tag on this product, its accessories, or related
products.
DO NOT operate this product should it malfunction or require repair. Operation of a malfunctioning
product, or a product requiring repair may result in serious personal injury or death. DO NOT
attempt to repair or modify the instrument, except as specified in the
Operation and Service
Manual. Contact the Service Department to arrange for a Returned Material Authorization (RMA).
Use ONLY genuine Sensidyne replacement parts when performing any maintenance procedures
described in this manual.
Failure to do so may seriously impair instrument performance. Repair or
alteration of the product beyond the scope of these maintenance instructions, or by anyone other
than an authorized service person, could cause the product to fail to perform as designed and
persons who rely on this product for their safety could sustain severe personal injury or death.
DO NOT operate in excessive chemical or water vapor atmospheres. Failure to follow instructions
may cause permanent damage to the equipment.
The BDX
II Abatement Air Sampling Pump employs rechargeable Nickel-Cadmium batteries.
ALWAYS fully charge the battery pack before starting the pump.
DO NOT operate the unit with improperly maintained batteries. This can cause pump failure or
faulting.
DO NOT operate the unit with a dirty or blocked inlet filter. This can cause pump failure or faulting.
DO NOT drop, crush, or roughly handle the unit, and NEVER submerge the unit in water. This can
cause pump failure or faulting.
DO NOT run the pump beyond its recommended specifications.
WARNINGS
