Sensica sensilight mini, User Manual

Page: 23 / 32

21
• The SensiLight™Mini needs special
precautions regarding EMC and needs to
be installed and put into service according
to the EMC information provided.
• Portable and mobile RF communications
equipment can affect SensiLight™Mini.
• The use of accessories or replacement
parts, other than those sold/specified
by sensica International, may result
Guidance and manufacturer’s declaration – electromagnetic emissions
as per IEC 60601-1-2: 2007 - Table 1
The SensiLight™Mini is intended for use in the electromagnetic environment
specified below. The customer or the user of the SensiLight™Mini should assure
that it is used in such an environment.
Emissions test Compliance
Electromagnetic
environment – guidance
RF emissions CISPR 11 Group 1
The SensiLight™Mini uses RF energy only for
its internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions CISPR 11 Class B
The SensiLight™Mini is suitable for use
in all establishments, including domestic
establishments and those directly connected to
the public low voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions IEC 61000-3-3
Complies
EMC Information
in increased emissions or decreased
immunity of the SensiLight™Mini.
• The SensiLight™Mini should not be
used adjacent to or stacked with other
equipment and that if adjacent or stacked
use is necessary, the SensiLight™Mini
should be observed to verify normal
operation in the configuration in which it
will be used.
Electromagnetic compatibility (EMC) and Specifications