background image

Englis

h

4

Indications for Use

The Sensifirm device is intended 
to achieve the following result, 
using non-thermal 
radiofrequency combined with 
massage: temporary reduction 
in the appearance of cellulite.

Sensifirm is a home-use device 
used for the temporary reduction 
in the appearance of cellulite. 
The treatment is applicable to 
areas of the body where cellulite 
occurs: the buttocks and thighs.

Sensifirm brings a completely 
new approach to non-invasive 
and non-ablative treatment, 
featuring Sensica 
LIPOTHERM RF™ (Radio 
Frequency) technology, 
commonly used by professional 
medical practitioners worldwide. 

The Sensifirm device combines 
the advantages of localized 
heating produced by 
radiofrequency energy, 
together with a massage 
achieved by a vibration motor 
and manual manipulation. 

The massage. 

Massage 

therapy is known to be useful 

for various applications, 
including improving cellulite 
appearance. The Sensifirm 
houses a vibration motor, 
which causes a gentle 
massage sensation as you 
move the device over your skin.
 

RF technology. 

Radio 

Frequency (RF) is a form of 
electromagnetic energy that 
has been used for a long time 
in aesthetic medicine. The 
spacing between Sensifirm’s 
four RF electrodes enables 
great treatment volume and 
allows multiple RF waves to 
reach deep into the skin layers, 
heating the dermis, 
hypodermis (inner skin layers) 
and subcutaneous fat layers, 

without damaging the 
epidermis (outer skin layer).

The deep thermal effect of the 
combined RF currents and 
massage activates several 
biological mechanisms, among 

which are collagen and elastin 
remodelling and later 
production, improvement in 
microcirculation and in 
lymphatic drainage. Together, 
these effects lead to 
improvement in cellulite 
appearance, with the best 
possible visible results, that last 
for 3 months.

What is Sensifirm? 

How does it work? 

Introducing LIPOTHERM RF

 

technology 

Summary of Contents for Sensifirm













































Reviews: