9
Englis
h
Important:
Do not use any
cream or gel while using the
device since it may prevent
normal operation.
1. Insert the Power Supply into
the base of the device.
2. Plug the Power Supply
into an electrical outlet.
The standby indicator will
illuminate blinking green.
Step 2: Device Operation
This device is equipped with a unique intelligent built-in
skin-tone sensor, located below the treatment window.
This unique safety feature is active continuously
during the treatment and will prevent a flash from
occurring in areas where your skin is too dark or too
tanned, even if your general skin type is lighter.
2
3
1 4
5
6
7
8
ON/OFF button and
energy level button
1
Skin tone and contact sensor
5
Status indicator:
• Lack of contact
• Non-allowed skin tone
• Device not usable
3
Treatment window
7
Trigger button
2
Power supply socket
6
1-3 energy level display
4
Lamp
8
3. Turn the device on. When
the device is turned on
it will be automatically
set to the lowest energy
level (1) and the energy
level display will show
a steady green light.
Manually change energy
levels by pressing the
energy selection button