Display (optional accessory) Operating Instructions
The Display is an optional accessory intended for use with the Armband. It allows you to easily view your
up-to-the-minute information including calories burned, steps taken, and physical activity duration.
Clip
The clip allows you to attach the Display firmly to material such as a t-shirt or trousers. Never slide thick
materials into the clip opening as it may strain and damage the clip. To attach the clip:
1. Gently lift the clip lever to open the clip mouth.
2. Slide the material you wish to attach to the clip between the
upper and lower portions of the clip mouth.
3. Push the clip lever back down to tighten and secure the clip.
Using the Display
To begin using your Display, you must initially pair it with
your Armband.
1. Slide the Armband onto your left arm and wait for it to power on. This may take up to 10 minutes.
2. After the Armband powers on, hold down the Display’s MODE and VIEW buttons until “Hello” is
displayed on the screen.
3. The Display will read PRESS ARMBAND BUTTON TO SYNC. The Display must be within 3 feet of
the Armband.
4. Press and quickly release the Armband’s Status Button. WELCOME and your first name will scroll across
the Display to indicate pairing and synchronization are complete.
If the Armband is not within range of the Display or is not powered on, the Display will scroll ARMBAND
NOT FOUND. In this case, try repeating the above steps.
The Armband and Display
must
be synchronized before the Display will function properly. Information is
transmitted every 60 seconds from the Armband to the Display as long as they are in sync. If data is not
received from the Armband for 5 minutes, the Display will revert to a NOT IN SYNC mode and display the
TIME. They can also occasionally go out of sync due to environmental interference. Once the Armband and
Display have been paired, you can re-sync the Armband and Display by simply pressing the button on the
Armband, then pressing the MODE button on the display.
4 OF7
