Proper Wear
Wear your Armband on the back of the upper left arm (the tricep). To work properly, the Armband logo must
face upward towards the shoulder and the silver sensors on the underside of the Armband will be in contact
with your skin.
1. Be sure the upper left arm is clean, dry, and free of lotion
or oil then slide the Armband onto your left arm.
2. Adjust the strap so that it fits comfortably, and then secure
the Velcro pull-tab. Ensure that the sensors on the
underside of the Armband maintain continuous contact
with your skin and that the Armband does not slide off
your arm.
3. Do not secure the strap too tightly. You should be able to
place two fingers beneath the strap. Once the strap is
adjusted to a comfortable fit, there is no need to readjust
the Velcro tab. Simply slide the Armband on and off your
arm by stretching the strap.
4. Wear the Armband no more than 23 hours a day. Be sure
to leave it off 1 hour per day.
5. Replace the strap if it has lost its elasticity. Information on
obtaining replacement parts can be obtained where you
purchased the Armband.
The Armband will turn on and begin collecting data within
10 minutes. Activation is indicated by a series of audio tones.
Please note that there is no power button on the Armband.
The SenseWear system components include the Armband and the optional Display device.
The Armband collects data through sensors to analyze physiological and lifestyle data. The
Display shows up-to-the-minute user information.
Armband Operating Instructions
3 OF 7
