Document
IMA0123
Rev
4
Page
2 (4)
To open the wall mounted housing
Figure 1. Closed housing seen from the top and the side. The housing is opened by inserting a screw
driver and pushing to the front side of the housing. The locking hooks will then be released.
Figure 2. Closed housing seen from the side.
Figure 3. Closed housing seen from the side.
The housing is opened by inserting a
Never push to the right. The locking hooks may
screw driver and pushing left (to the front side).
break and the housing is damaged
The locking hooks will then be released.
Dimensions
Figure 3. The dimensions of the sensor in mm and (inches)
Front
Wall
Insert screw driver
Push upwards to open
Front
Wall
128,4(5,06)
85(3,34)
32,7(1,29)
30(1,18)
30(1,18)
30(1,18)
30(1,18)
52,5(2,07)
30(1,18)
