EM aSENSE-VAV (Modbus) all housings installation Oct'08
2 of 11
Mounting of the sensor
A
B
The wall plate is screwed onto the wall
A Put the top tabs of the front part into the top holes of
The screw heads should be max 4 mm
the wall plate.
B Press the lower edge of the case onto the wall plate to
latch
DI1
The top part is pushed under the
Terminals and jumpers on
aSENSE™ VAV
standard
.
locking hooks of the wall plate
The darker positions are default settings.
and is secured with a screw
Terminals and jumpers are located under the top part.
If for some reason the PCB must be removed it must be handed carefully and
protected from electrostatic discharge! Normally, removing the PCB is not
required.
