EM aSENSE-VAV (Modbus) all housings installation Oct'08
11 of 11
Note 2
:
aSENSE™
VAV
can deliver both a voltage or a current loop for OUT1/OUT2. For OUT4 a
voltage output or an open collector output is selected with jumper OUT4. To change between voltage
and current output mode the hardware jumpers are used. There is one jumper for OUT1 and one for
OUT2, so that one output can be a voltage output and the other a current output. Both, voltage output
and current output, can have start points 0 % (0-10 VDC or 0-20mA) or 20% (2-10 VDC or 4-20mA)
selected from PC software.
Note 3: Current of Open Collector is internally returned to G0 terminal.
DI1
Terminals and jumpers on
aSENSE™ VAV
standard
.
DI1
Terminals and jumpers on
aSENSE™ VAV
with communication jumper
