| PG 8
www.snapav.com
1
2
3
4
5
6
7
8
9
10
11
SE-300-WT-BODY
1. LCD display
2. Battery tray
3. Set button: set the
configuration of the
bodypack transmitter
4. Up button: To select settings
5. Down button: To select
settings
6. Power switch/mute
7. 4-pin Mini-XLR mic. input
8. Antenna
9. Belt Clip
10. Battery status display
11. Group & Channel
Features
The SE-300-WT-BODY transmits sound via wireless signal used for corporate presentations, houses of
worship, audio/video conferencing, video, film and sound reinforcement, or other applications where
low-profile, discreet placement is preferred.
• Phase-locked Loop (PLL) synthesized tuner ensures reliable performance
• Powered by 2 x AA batteries with 12 hrs. battery life
• Equipped with 4-Pin Mini XLR connector
• LCD display with channel and battery life indicator
• The “lock-on” function prevents tampering and RF interruption
• Extended dynamic range and smooth frequency response
Installation Tips & Guidelines
After placing batteries inside the SE-300-WT-BODY and attaching the microphone, pair the wireless
frequency with the wireless receiver. Refer to section 5 for full instructions on how to pair the frequency.
Annotations
7. Body-pack Transmitter (Sold Separately)
