background image

Golden Rule Placement

SENSASOUND C600 Classic

1. The front speakers should always be kept at the same horizontal level with the audience ear 

height, if not, then they should be kept their height difference at least within 24”. This is 
because man’s ear is more sensitive to horizontal position rather than vertical position. 

2. Do not place any sofa or furniture between the speakers and listening positions. 
3. For surround speakers, the best height is above 26” from audience’s ears which is generally 70” 

to 80” above the ground. 

4. Surround speakers should form a 90

°

-110

°

angle to center speaker, while the rear speakers 

form a 135

°

-150

°

angle to the center speaker.

HiFi Stereo

Home Theater 5.1

Home Theater 7.1

1. If your AV receiver supports Dolby Atmos technology, you can upgrade your home theater 

system into Dolby Atmos 7.1.2 or Dolby Atmos 7.1.4 system.

2. Dolby Atmos system is flexible for surround speaker placement. This system can deliver a much 

greater enveloped sound field by adding surround speakers into the ceilings. 

3. The theater room ceiling should be flat with no arches, edges or corners for a smooth response.
4. The ceiling height is ideal between 94” to 106” for a best audio performance.

Dolby Atmos 7.1.2

Dolby Atmos 7.1.4

Dolby Atmos Placement

5

Summary of Contents for C600 Classic Series












Reviews: