Sensaphone IMS-4000, User Manual, Page: 112 / 174

IMS-4000 Manual
110
time by holding down either the Shift key (select a continuous block) or the Control Key (to select
a discontinuous assortment of outlets). After making your selections, click the
On
,
Off
or
Cycle
but-
ton to execute the command. When Cycle is selected, the outlet will be switched Off for 10 seconds
and then will automatically switch back On. When you select Off or Cycle , an additional prompt
appears to confirm that you really want to remove power from the selected device. Note that the
PowerGate2 will switch all selected outlets simultaneously.
Figure 10: Switching Outlets
Automatic Outlet Switching
The IMS-4000 allows you to program an Alarm Response whenever an environmental or IP Alarm
occurs. An Alarm Response is an action that occurs automatically whenever an alarm occurs.
Using the PowerGate2 you can automatically turn On, Off, or Cycle equipment whenever an
Environmental or IP alarm occurs. Up to eight actions can be applied for each alarm response. The
PowerGate2 will perform all automated switching simultaneously. See
Configuring Environmental
Inputs and Configuring IP Alarms in the IMS-4000 Software Configuration Manual for details.
Switching Outlets via Telephone
The IMS-4000 allows you to switch PowerGate2 outlets using a touch-tone telephone. To do this
simply call the unit and enter the voice menu system. You must have a valid user code and the
appropriate permissions to execute this command.
Switching Outlets via Email
See the
Two-Way E-Mail Commands
section in the Software Configuration chapter.