SENSASOUND C600 Classic
5
Receiver Set Up
Most modern receivers support “On Screen Setup”, you can easily setup your subwoofer by following
the screen setup guidelines.
1. Enter into receiver’s setup menu and go to “Speaker Setup”. Set the subwoofer value to “LFE +
Main” if your front speakers are “small”; if your front speakers are “large”, then set up the
subwoofer value to “LFE”
2. When set up the “crossover”, it’s important to match the crossover point between the front
speaker and subwoofer. (e.g. if your front speaker crossover is at 80Hz, your subwoofer should set
at 90Hz for the best result)
3. In the speaker distance menu, you should measure the distance between your subwoofer and
your mainly listening position, then input the distance value into the menu.
4. The last step is to set up the volume level. You can set the volume at subwoofer’s amplifier board
at 12 o’clock or 2 o’clock place first, then fine-tune the “level calibration” knob at receiver for you
preference SPL level.
Setting your Subwoofer
Recommend Initial Settings
From top to bottom, there are four knobs at
subwoofer amplifier board for adjusting volume level,
crossover, phase and power switch. We recommend to
do an initial setting first, then fine-tune to your
preference value.
Initial setting suggestion:
LEVEL: 12 o’ clock to 2 o’clock
Crossover: 80-100 Hz
Phase: 0 º
Power: Auto
SW-C600W Specification
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz~150Hz
Max Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W
Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12” Polypropylene Bass Cone
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low-Frequency Reflex Subwoofer
Amplifier Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class D Amplifier
Dimensions (W*H*D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1”*16.5”*14.9”(36cm*42cm*38cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.2 lbs(16.0 Kg)
Summary of Contents for SW-C600W
Page 1: ...SW C600W User Manual ...
