Sensa Sound SW-C600W, User Manual

Page: 6 / 9

SENSASOUND C600 Classic 4
Subwoofer Connection
1. Before you do the connection, make sure that you have prepared a dedicated subwoofer cable
to support your bass system.
2. Found the place of “subwoofer output” at the rear of your receiver and the place of “SUB IN” at
your subwoofer amplifier board, insert the subwoofer cable from the receiver’s “subwoofer output”
to subwoofer’s “SUB IN”.
3. We recommend to use a “shielded subwoofer cable” to avoid annoying signal into your bass
performance.
4. Found the place of “Power Connector” at your subwoofer amplifier board. Plug the AC power
cord into the back of your subwoofer and then into a wall outlet or power strip. DO NOT plug it into
the back of your receiver or preamp.
5. SW-C600W is sold with a wireless receiver. If you want to use wireless function, insert the TX-
C600 transmitter into the receiver’s “subwoofer output” instead of subwoofer cables.
Subwoofer Placement
Properly place the subwoofer will improve the bass performance greatly and deliver even sound
pressure level throughout your listening area. Here are a few guidelines to help finding the optimal
location.
1. If you use one SW-C600W subwoofer, you can place it within one foot of the corner to get a
greatest output level.
2. If you use a pair of SW-C600W subwoofers, measure the width between two sides of your
room, place them at 1/3 and 2/3 of the room.
3. Different from 5.0 system, the placement rule of subwoofer is much flexible than 5.0 system
since it is a non directional sound unit. Use the golden rule to perform a few experiments to find
a best location in the room until your ears are satisfied with the results.
One Subwoofer Placement A pair of Subwoofer Placement