12
(3)
If the 4-1 Modular Device includes the IC card reader and you
intend to operate the monitor without the base unit, then plug the
RS-232 cable for IC card reader into the correct I/O port behind the
monitor unit. Then connect the other end of IC card RS-232 cable
to the PC’s RS-232 port.
VFD
RS232 PORT
(4)
If the 4-1 Modular Device includes the i-Button, MSR and/or 40
Key Keypad, and you also intend to operate the monitor without
the base unit, then plug the PS2 K/B cable into the I/O port behind
the monitor unit.
NOTE: Make sure that you
have plugged the
cable into the correct
I/O port.
NOTE: Make sure that you
have plugged the
cable into the correct
I/O port.
