background image

Manufacturer Declarations

VMX 200-II

 

| 27

Statements regarding FCC and Industry Canada

This device complies with Part 15 of the FCC Rules and with Industry
Canada standard(s) for license-exempt radio devices. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules and RSS 210
of Industry Canada. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment. 

RF Radiation Exposure Information

Since the radiated output of this device is far below the FCC/IC RF radio fre-
quency exposure limits, it is not subjected to routine RF exposure evalua-
tion as per Section 2.1093 of the FCC rules and RSS GEN rules sections 2.5.1
& 2.5.2.

Trademarks

The 

Bluetooth

®

 word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic
GmbH & Co. KG is under license.

iPod

®

 and iPhone

®

 are registered trademarks of Apple Inc, registered in the

U.S. and other countries.

Summary of Contents for VMX 200-II






























Reviews: