Sennheiser TOURGUIDE UHF, Instructions For Use Manual

Page: 16 / 60

16
Using the receiver
Adjusting a setting
Press the
/
(UP/DOWN) rocker button to adjust the setting
of the menu.
The new setting flashes on the display.
By briefly pressing the rocker button, the display jumps either
forwards or backwards to the next setting. In the “ TUNE ” menu,
the rocker button features a “fast search” function: If you hold
down the or button, the display cycles continuously, allow-
ing you to get fast and easily to your desired setting. The new
setting flashes on the display until it is stored.
Storing a setting
Press the SET button to store the setting. “STORED” appears on
the display, indicating that the setting has been stored. You
return to the operating menu of the setup menu. The last menu
selected flashes on the display.
Canceling the entry
Press the ESC button to cancel the entry. With the menus “ LOCK “,
“ SQUELCH “, “ LTD “, “ SW-REV “ and “ COPY “ you return to the start
display “SETUP“. The last menu remains unchanged.
An exception is the “ TUNE “ menu. When canceling the entry with
this menu, you will stay in the setting mode of the menu but you
return to the display of the current channel (e.g. “CH 01“). It is then
possible to restart your entry.
Exiting the setup menu
Switch the receiver off to exit the setup menu. To do so, turn the
volume control
counterclockwise until it clicks
If you then restart the receiver you get into the user menu and
the current channel is displayed.
Operating menu of the receiver
The user menu of the receiver
/ :
Kanal 01...20 Kanal einstellen
USER-MENÜ