background image

SR 2020-D | 21

Cleaning the SR 2020-D

Cleaning the SR 2020-D

CAUTION

LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE TRANSMITTER!

Liquids entering the housing of the device can cause a short-circuit and damage the elec-

tronics.

Keep all liquids away from the device.
Do not use any solvents or cleansing agents.

Before cleaning, disconnect the device from the mains.
Only use a soft and dry cloth to clean the device.

If a problem occurs

Problem

Possible cause

Possible remedy

No operation indication 

on the transmitter

No mains connection

Check the mains unit and the con-

nection to the DC IN socket (see 

page 11)

Audio signal is distorted

Transmitter sensitivity is 

adjusted too high

Change the sensitivity of the mi-

crophone input or line input (see 

page  17)
Select the source of the input signal 

(see page 17)

Occasional drop outs in 

the audio signal

Distance to the transmit-

ter is too great

Reduce the distance to the trans-

mitter

Interference of unknown 

origin

Set the transmitter and receiver to a 

different channel (see page 15)

Interference is being 

received from a second 

transmitter

Change the transmitters to different 

channels (see page 15)

No radio waves on the 

receiver display

Antenna is badly posi-

tioned

Improve the position of the transmit-

ting antenna: Mount the antenna to 

the front of the rack or use a remote 

antenna

No RF signal: transmitter 

and receiver are not on 

the same channel

Set the transmitter and receiver to 

the same channel (see page 15)

No RF signal: transmis-

sion range is exceeded

Reduce the distance between re-

ceiver and transmitter
Improve the position of the transmit-

ting antenna

If a problem occurs that is not listed in the above table or if the problem cannot be solved 

with the proposed solutions, please contact your local Sennheiser agent for assistance.

Summary of Contents for SR 2020-D -


























Reviews: