SL MCR DW
12
Putting the receiver into operation
The receiver is powered using
Power over Ethernet
. As soon as the power
supply is established, the receiver switches on automatically. There is no
separate on/off switch.
▷
See „Connecting to the network (power supply and configuration)“.
When the receiver starts, all four LEDs light up green for about 20 seconds.
Then the LEDs change to displaying the status of the respective channel.
▷
See „Meaning of the status LEDs“.
The receiver is operated and configured using the
Sennheiser Control
Cockpit
control software. You cannot operate the receiver on the device it-
self.
▷
See „Controlling and monitoring the receiver via the network“.
Controlling and monitoring the receiver via the net-
work
To configure and use the receiver, you need the free
Sennheiser Control
Cockpit
control software. You can download it here:
www.sennheiser.com/control-cockpit-software
To use the
Sennheiser Control Cockpit
, you must complete a one-
time registration with your e-mail address to receive the software ac-
tivation code.
The online help contains detailed information about the functions of the
Sennheiser Control Cockpit
and how to configure the
SL MCR DW
and
the network. The online help can be found on the Sennheiser Control Cock-
pit product page (www.sennheiser.com/control-cockpit-software) and in
the software itself.
