58
22 Error checklist
Problem
Possible cause
No operation indication
Battery is flat
No RF signal
Transmission frequency is not the same
as the receivng frequency
Transmitter is out of range
RF signal available but
Transmitter is muted (“
MUTE
”)
no audio signal
Receiver’s squelch threshold adjusted
too high
Transmitter does not supply phantom
powering to condenser microphone
(
“18 Switching the phantom
powering on/off (PHAnto)”, page 51)
Audio signal noisy
Transmitter sensitivity adjusted too
low
Receiver’s AF output level adjusted too
low
Audio signal distorted
Transmitter sensitivity adjusted too
high
Receiver’s AF output level adjusted too
high
If problems occur that are not listed in the above table, please
contact your local Sennheiser agent for assistance.
Summary of Contents for SKP 30
Page 1: ...SKP 30 3 BEDIENUNGSANLEITUNG...
Page 31: ...SKP 30 33 INSTRUCTION MANUAL...
