44
11 Operation
The SKP 30 plug-on transmitter has been factory-preset to allow
immediate use after switch-on. Please note, however, that the
transmitter sensitivity is dependent on the application. To avoid
overmodulation and distortion, please first check whether the preset
sensitivity is suitable for your particular application (
“16 Adjusting
the sensitivity (SEnSit)”, page 49).
Attention:
To operate switches or press buttons on your transmitter, do not
use any tools such as screw drivers, etc., as this can damage the
operating controls
.
ON/OFF
Press the
ON/OFF
button to switch the transmitter on or
off.
MUTE
Use the
MUTE
switch to noiselessly mute the audio signal
without switching off the transmitter.
SET
Press the
SET
button
— to select a menu,
— to change to the next menu,
— to return to the top menu level.
Press the
UP
button
— to adjust the setting of a menu.
Press the
DOWN
button
— to adjust the setting of a menu.
Summary of Contents for SKP 30
Page 1: ...SKP 30 3 BEDIENUNGSANLEITUNG...
Page 31: ...SKP 30 33 INSTRUCTION MANUAL...
