10
Using the plug-on transmitter
Using the plug-on transmitter
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the plug-on transmitter on (see next section).
The transmission link is established and the diversity receiver’s RF level
display “
RF
” reacts.
If you cannot establish a transmission link between plug-on transmitter
and receiver, read the chapter “Synchronizing the plug-on transmitter
with a receiver” on page 26.
Switching the plug-on transmitter on/off
To switch the plug-on transmitter
on
(online operation):
To switch the plug-on transmitter on and to
deactivate the RF signal on
switch-on
(offline operation):
It is vital to observe the notes on frequency selection on page 26.
왘
Press the
ON
/
OFF
button
쐊
.
The plug-on transmitter transmits an RF signal. The red
ON
LED
쐆
lights up and the “
Frequency/Name
” standard
display appears on the display panel. The transmission icon
햵
is displayed.
왘
Keep the
ON
/
OFF
button
쐊
pressed until “
RF Mute On?
”
appears on the display panel.
쐆
쐊
ON/OFF
ON/OFF
