![background image](http://html1.mh-extra.com/html/sennheiser/s1-passive/s1-passive_instruction-manual_1241378019.webp)
If a problem occurs ...
18 |
S1 PASSIVE
Replacing the ear pads
1
Grasp the edge of the ear pad and peel it up and away from the ear cup.
2
Slide the new ear pad onto the ear cup.
Replacing the wind screen
1
Pull the wind screen from the microphone.
2
Carefully slide the new wind screen over the microphone.
If a problem occurs ...
Problem
Possible cause
Solution
Page
Power LED
does not light up
on switch-on
The batteries/
rechargeable batteries
are flat.
Charge the rechargeable
batteries or replace the
batteries.
Audio signal in
one ear only
You are receiving a
mono source but the
headset is set to stereo
operation.
Set the headset to mono
operation.
The volume control
is misadjusted.
Check the
volume
control
.
1
2
1
2