Using the S1 PASSIVE
S1 PASSIVE
| 13
Switching the control unit on/off
If you are using the headset together with an audio device or mobile phone, the
control unit must be switched on.
왘
Set the Power
OFF
/
ON
switch to the position
ON
.
Adjusting the headset to the listening situation
Adjusting the volume
The control unit features a volume control which allows you to adjust the volume
for the left and right channel separately. Using the volume control, you can also
adjust the volume for both ATC communications and your connected device.
왘
Use the volume control to adjust the volume to a comfortable level.
ON
The control unit is switched on. The Power LED
lights up, indicating the charge status of the
batteries/rechargeable batteries.
OFF
The control unit is switched off. The Power LED
goes off.
WARNING
Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent
hearing defects.
왘
Before putting the headset on, set the volume to a low level.
왘
Do not continuously expose yourself to high volumes.
ON
OFF
Vol +
Vol –
