![background image](http://html1.mh-extra.com/html/sennheiser/quadpack-qp-3041/quadpack-qp-3041_instruction-manual_1242828027.webp)
28
28
Operation
Operating the receivers
The EK 3041 receivers mounted into the Quadpack are operated as ususal.
Turning the Quadpack on and off
E
To turn the Quadpack on, set the
POWER
(ON/OFF) switch
J
to posi-
tion “
I
”. The operation indicator
E
lights up red.
E
To turn the Quadpack off, set the
POWER
(ON/OFF) switch
J
to
position “
0
”. The operation indicator
E
goes off.
Note:
All receivers mounted into the Quadpack are turned on and off via the
Quadpack’s
POWER
(ON/OFF) switch. If required, the individual
receivers can be turned on and off via their respective
ON
buttons.
Monitoring
For monitoring the audio signals of the mounted receivers, connect a pair of
headphones to the headphone output
G
.
E
Press the monitor key
C
of the receiver whose audio signal you wish to
monitor. The color of the control LED
D
of the selected receiver chan-
ges from red to green.
E
You can also press several monitor keys if you wish to monitor the audio
signals of several receivers simultaneously. The control LEDs of all
selected receivers light up green.
Note:
The monitor output has enough amplification headroom in order to
enable monitoring even at low modulation levels. The volume at the
monitor output should therefore only be turned up gradually!
E
J
C D
G
! !"
Summary of Contents for Quadpack QP 3041
