26
26
Mounting the antennas to the front of the Quadpack
If your Quadpacks are to be mounted into a rack or a tower, the antennas
can be connected to the front side by using the GA 3030 AM antenna mount
(see „Accessories” on page 31).
E
Mount the antenna holders
D
to the two outer handles of the two Quad-
packs as shown in the diagram on the left. Fasten the antenna holders by
means of the supplied four screws and plain washers to the prepared
holes.
E
Guide the two cables sideways to the rear of the Quadpacks.
If you wish to mount the two Quadpacks into a rack, fix the two
cables
C
of the GA 3030 AM antenna mount to the rack mount
“ears”
B
as shown in the diagram on the left.
E
Connect the two telescopic antennas to the antenna holders
D
and align
the antennas upwards.
Daisy-chaining two Quadpacks
If you daisy-chain two Quadpacks and mount them side by side into a rack,
they can be operated with only one pair of antennas. This pair of antennas
can be connected to the front of the rack as described above.
E
Connect one antenna or one cable
C
of the GA 3030 AM antenna
mount to the BNC socket “
ANT. A
”
O
of each Quadpack.
*
= to the antennas mounted to the front of the rack.
E
Connect the BNC socket “
RF OUT A
”
Q
of each Quadpack to the BNC
socket “
ANT. B
”
P
of the other Quadpack as shown in the diagram
above.
D C B
P O
P
Q
Q
O
# !"
Summary of Contents for Quadpack QP 3041
