Putting the PXC 360 BT into operation
16
Connecting the PXC 360 BT using the audio cable
Connecting the audio cable
You can connect the headphones to the audio source using the audio cable
if:
•
you do not want to use the
Bluetooth
function,
•
you are not allowed to use the
Bluetooth
function (some airlines do not
allow
Bluetooth
transmission)
or
•
the battery pack is flat.
If the headphones are already connected to the audio source via the
Bluetooth
interface, the
Bluetooth
connection is automatically discon-
nected when you connect the audio cable. The
LED
햲
flashes 3 times
red and you hear a descending beep.
왘
Connect the 2.5 mm jack plug of the audio cable to the socket
쐄
of the
headphones.
왘
Connect the 3.5 mm jack plug of the audio cable
씈
to
– the headphone socket of your audio source or
– the audio adapter for ¼” (6.35 mm) jack socket
씉
if the 3.5 mm jack
plug of the audio cable is too small
– the in-flight adapter
씊
if you want to use the headphones with an
in-flight entertainment system.
When the audio cable is connected to your audio source, you hear the
sound from your audio source and the
LED
햲
flashes blue.
Detaching the audio cable
If you want to use the PXC 360 BT as
Bluetooth
headphones only, you can
detach the audio cable
씈
.
왘
Pull the 2.5 mm jack plug of the audio cable
씈
from the socket
쐄
of
the headphones.
When the audio cable is connected to the headphones, the
Bluetooth
function cannot be switched on.
1
씈
Music
Photos
Videos
Extras
Settings
Shuffle Songs
씉
씊
1
When detaching the audio cable, the
Bluetooth
function is not
automatically switched on.
왘
Switch the
Bluetooth
function on again (see “Switching the
Bluetooth
function on/off” on page 18).