Sennheiser PX 210 BT -, Instruction Manual

Page: 17 / 30

Using the PX 210 BT
16
Using the PX 210 BT
Adjusting the PX 210 BT to the listening situation
The headphones have a Bluetooth function for wireless connectivity.
Depending on the listening situation, you can switch this function on or off.
Switching the Bluetooth function on/off
Via the Bluetooth interface, the headphones can be connected to a wide
variety of Bluetooth enabled devices.
To switch the Bluetooth function on:
왘
Press the Bluetooth button
쐋
and keep it pressed until the LED
햲
flashes 3 times blue. The Bluetooth function is switched on.
To switch the Bluetooth function off:
왘
Press the Bluetooth button
쐋
and keep it pressed until the LED
햲
flashes 3 times red. You hear a descending beep.
The
Bluetooth button
쐋
goes off. The LED
햲
flashes blue and the
Bluetooth function is switched off.
Changing the volume
The PX 210 BT allow you to change the volume of the audio signal:
If you press the respective button briefly, the volume is changed
incrementally; if you hold down the button, the volume is changed
continuously.
When the minimum or maximum volume is reached, you hear an
acknowledgement tone.
쐋
Button Duration Function Button Duration Function
Incrementally
increases the
volume Incrementally
reduces the
volume
Continuously
increases the
volume Continuously
reduces the
volume
1 s 1 s