DE
EN
FR
IT
ES
NL
11
Putting the PX 210 BT into operation
Switching the PX 210 BT on/off
Switching the PX 210 BT on
왘
Press the
Master
button
햶
and keep it pressed until the
LED
햲
flashes blue. You hear an ascending beep.
– When switching the headphones on
for the first time
, they will
automatically go into pairing mode. The headphones are waiting to
be paired with a
Bluetooth
enabled device (see page 12).
– When the headphones
are already paired with an audio source
, the
Bluetooth
connection is automatically established. You hear an
ascending beep and then your audio source.
– When the headphones
are already paired with an audio source
but
the
audio source
is
switched off
or out of range, the
LED
햲
flashes
blue. The headphones will try for 3 minutes to connect to one of the
up to 8 previously paired audio sources. If this fails, the headphones
automatically switch off after 60 minutes.
Switching the PX 210 BT off
왘
Press the
Master
button
햶
and keep it pressed until the
LED
햲
flashes 3 times red.
You hear a descending beep. The
Bluetooth
connection is automatically
deactivated. The headphones switch off.
CAUTION!
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headphones also sound exceptionally good at low
volumes.
왘
Set the volume to a comfortable level.
5
1
5
1
