128
Preparing the headsets for use
Adjusting the headband
For good noise attenuation and best possible comfort, the headband has to be adjusted
to properly fit your head:
씰
Wear the headset so that the headband runs over the top of your head.
씰
Adjust the length of the headband so that
•
your ears are completely inside the ear cushions,
•
you feel even, gentle pressure around your ears,
•
a snug fit is ensured.
Note:
Make sure not to squeeze any connecting cable when adjusting the headband.
Squeezing can damage the connecting cables.
씰
Turn on the NoiseGard™ active noise compensation by setting the ON/OFF switch
to ON (
“Turning NoiseGard™ on/off”).
씰
Final adjustment is best made in a noisy environment.