![background image](http://html.mh-extra.com/html/sennheiser/noisegard-hmdc-322/noisegard-hmdc-322_instructions-for-use-manual_1240895051.webp)
125
2. Connecting the headset to the battery pack
(except HMEC 302, HMEC 305 and HMEC 306)
The NoiseGard™ electronics of the HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and
HMDC 322 headsets can also be powered via the BP-03 battery pack (
‘Recommended
accessories’). The battery pack can be operated either on standard or rechargeable
batteries (not included in the delivery). However, to ensure a longer operating time, we
would recommend using standard AA size alkaline manganese batteries (IEC LR6). If
operated on rechargeable batteries, the operating time will be reduced to approx. 3
hours.
Inserting / replacing the the batteries
씰
Open the cover
of the battery compartment.
씰
Insert four AA size alkaline-manganese batteries (IEC LR6). Observe correct polarity
when inserting the batteries.
씰
Close the cover
of the battery compartment.
LED operation and battery status indication
The battery pack has two control LEDs.
Green LED:
The battery pack is turned on and the battery capacity is sufficient.
Red LED:
The batteries are low. Replace the batteries.