![background image](http://html1.mh-extra.com/html/sennheiser/mm-400/mm-400_instruction-manual_1240755027.webp)
Manufacturer Declarations
26
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
In compliance with:
USA
FCC ID: DMOCBSSAB
Since the radiated output power of this Class1 BT device is far below
the FCC radio frequency exposure limits, it is not subjected to routine
RF exposure evaluation as per Section 2.1093 of the FCC rules.
Canada
IC: 2009D – MMBTX
Europe
Australia / New
Zeeland
Singapore
China
CMIIT ID: 2009DJ3545
Taiwan
Japan
Russia
Korea
CCAB09LP4080T6
R 203WWJN000007
ME61
SC9 - MM400