37
Selecting a menu
Press the
/
rocker button (UP/DOWN) to select a menu.
Press the
SET
button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the
/
rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the
/
rocker
button, the display jumps either
forwards or backwards to the next setting. In the “
FADE
”,“
TUNE
“,“
NAME
“
and “
ACCESS
” menu, the
/
rocker
button features a “fast search”
function: If you hold down the
or
button, the display cycles
continuously, allowing you to get fast and easily to your desired setting.
The new setting flashes on the display until it is stored.
Storing a setting
Press the
SET
button to store the setting. “STORED” appears on the
display, indicating that the setting has been stored. The display then
returns to the top menu level.
With most menus, new settings become effective immediately without
having to be stored. An exception are the “
RESET
” menus of both
transmitter and receiver and the “
TUNE
” menu of the transmitter. With
these menus, new settings only become effective after they have been
stored.
Exiting the configuration menu
When in the configuration menu, briefly pressing the
ON
/
OFF
button will
cancel your entry (ESC function) and return you to the “SETUP” display
without storing the setting.