![background image](http://html1.mh-extra.com/html/sennheiser/l-2015/l-2015_instructions-for-use-manual_1239987033.webp)
33
Recommendations and tips
... for system planning
y
Transmitter and receiver of a transmission link must be set to the same
frequency.
y
A transmitter can be received by several receivers on the same frequency.
y
However, a receiver cannot receive several transmitters on the same
frequency. Incorrect settings are indicated by crackling and chirping in the
receiver.
... for the MKE 2015-0 screw-on microphone (optional accessory)
y
Adjust the length of the neck strap so that the distance between the
microphone and your mouth is 25 cm at the most.
y
The screw-on microphone allows you to transmit group discussions. For this
purpose, place the transmitter on the table on a soft and springy pad.
... for the ME 2015-H neckband microphone (optional accessory)
y
Always use the microphone with a popshield and position the microphone
at the corner of the mouth.
y
You can vary the bass reproduction by increasing/decreasing the talking
distance.
y
Make sure that the sound inlet is directed towards the mouth. The sound
inlet is marked with a little dot.
... for the SK 2015 transmitter
y
Make sure that the antenna and the microphone cable do not cross.
y
For best results, make sure that the transmitter sensitivity is correctly
adjusted.
... for optimum reception
y
Transmission range depends to a large extent on location and can be up to
50 m. There should be a “free line of sight” between transmitting and
receiving antenna.