Using the headset
12 |
HMEC 26-2
왘
Set the
MUTING OFF
/
ON
switch to the desired position to mute
your connected devices or to cancel the muting:
–
OFF
= muting is canceled
–
ON
= muting is activated
Changing the left and right stereo channel
The position “
R
” or “
L
” of the
BOOM
switch corresponds to the posi-
tion of the microphone on the left or right side of the mouth. When
the microphone boom is rotated to permit left or right side micro-
phone orientation, the
BOOM
switch allows you
to correctly assign
the audio channels (L/R) to the appropriate headphone sides. This
enables the correct orientation of the volume controls and any ste-
reo audio signals.
Powering NoiseGard™ via (rechargeable) batteries
왘
Insert two 1.5 V AA alkaline batteries (IEC LR 6) or two 1.2 V AA
rechargeable batteries (IEC LR 6). Observe correct polarity when
inserting the batteries.
The operating time with batteries/rechargeable batteries is
approx. 60 hours. With NoiseGard™ switched on (see page 10),
the LED
2
provides information on the remaining battery/
rechargeable battery capacity:
Summary of Contents for HMEC 26-2
Page 1: ...Notice d emploi Bedienungsanleitung Instruction manual HMEC 26 2...
Page 2: ......
Page 91: ......