33
32
boom
microphone
headphone
capsule (left)
compensation
microphone (left)
compensation
microphone (right)
headphone
capsule (right)
compensation
circuit (right)
6-pin
Redel
plug
microphone
amplifier
compensation
circuit (left)
PJ 068
plug
6,35 mm
plug
boom
microphone
headphone
capsule (left)
compensation
microphone (left)
compensation
microphone (right)
headphone
capsule (right)
compensation
circuit (right)
microphone
amplifier
compensation
circuit (left)
Schema a blocchi HMEC 25-6A
Schema a blocchi HMEC 25-KAP-2
Dati tecnici NoiseGard™ HMEC 25-6A/-KAP-2
Cuffia
Principio convertitore
dinamico, chiuso, sopraurale
Banda di trasmissione
16 Hz - 22 kHz
Impedenz
attiva/passiva:
200 / 180 ohm (mono)
400 / 360 ohm per ogni lato (stereo)
Volume attivo e passivo uguale
Fattore di distorsione
< 1 %
Smorzamento rumore
15 dB
±
3 dB nel campo di 100 Hz - 2 kHz
Risposta armonica dello
smorzamento rumore attivo
50 - 600 Hz
Microfono incl. preamplificatore
Principio convertitore
Capsula condensatore controelettrodo
elettrite, con compensazione del rumore
Banda di trasmissione
300 Hz - 5 kHz
in conformità a RTCA/DO-214
dall’angolo della bocca
Max livello pressione sonora
120 dB
Tensione di uscita
400 mV
±
3 dB a 114 dB distanza 6 mm
(in conformità a RTCA/DO-214)
Resistenza terminale
150
Ω
Tensione di alimentazione
tip. 16 V DC, ca 8 - 25 mA,
cablaggio secondo RTCA/DO-214
Dati generali
Forza pressione cuffia
ca. 2,5 N
Peso senza cavo
170 g
Cavo
su un lato, lunghezza totale: 1,8 m
Spina
HMEC 25-6A:
6-PIN Redel
HMEC 25-KAP-2:
6,35 mm jack plug cuffia
PJ-068, 5,25 mm microfono
Alimentazione NoiseGard™
12 - 35 V DC
Assorbimento corrente
tip. 18 mA