![background image](http://html1.mh-extra.com/html/sennheiser/flex-5000/flex-5000_manual_1240363011.webp)
DE
FR
ES
EN
Putting the Flex 5000 into operation
EN
Flex 5000
| 11
Charging the receiver’s rechargeable battery
A complete charging cycle takes
about 3 hours
. Before using
the receiver for the first time, charge its rechargeable battery
for a complete charging cycle without interruption.
When the rechargeable battery is almost empty, the
Receiver
status
LED lights up red and you hear 2 beeps via the receiver.
The
Battery
LED
on the transmitter lights up white. The
receiver switches off after a few minutes.
왘
Place the receiver into the transmitter’s charging compart-
ment so that the volume buttons face upwards. The
receiver is magnetically oriented to the correct position.
The receiver automatically switches off and the
Battery
LED
on the transmitter lights up white. The LED seg-
ments display the charge status of the rechargeable bat-
tery. When the rechargeable battery is fully charged, all
LED segments light up white.
Battery
LED
Meaning
–
Transmitter is not charging.
1
st
segment flashes
Rechargeable battery is being
charged. Less than 1/3 of the
charge capacity is reached.
1
st
segment lit,
2
nd
segment flashes
Rechargeable battery is being
charged. Up to 1/3 of the charge
capacity is reached.
1
st
+ 2
nd
segments lit,
3
rd
segment flashes
Rechargeable battery is being
charged. Up to 2/3 of the charge
capacity is reached.
All segments lit
Rechargeable battery is fully charged.
+
3 h
100
%
Flex_5000_570735_0117_PRT.book Seite 11 Montag, 10. Oktober 2016 3:58 15