14
To mount two EM 300 G2 into a rack:
Place the two receivers side by side onto a flat
surface, their bottom sides facing upwards.
Align the connecting plate
over the holes in the
bottom sides of the receivers.
Secure the connecting plate
to the receivers
using eight of the supplied recessed head screws
(M 3x6).
Hook the two rack mount “ears”
to the front
panels of the receivers.
Secure the rack mount “ears” to the receivers using
two of the supplied recessed head screws (M 3x6)
respectively.
Slide the receivers into a 19” rack.
Screw the rack mount “ears” tight.
When mounting only one receiver into a rack, use the
connecting bar
instead of the second receiver.
Hook the two rack mount “ears”
to the front
panel of the receiver.
Secure the rack mount “ears” to the receiver using
two of the supplied recessed head screws (M 3x6)
respectively.
Secure the connecting bar
to one of the rack
mount “ears”
using two of the supplied recessed
head screws (M 6x10).
If you are not front mounting the antennas, insert
the two covering plugs
!
into the antenna holes of
the connecting bar.
Slide the receiver into a 19” rack and screw the rack
mount “ears” tight.
To mount the receiver’s antenna connection to the
front of the GA 2 rack adapter using the AM 2 antenna
mount:
Screw the two BNC sockets
"
of the BNC extension
cables to the connecting bar
using the supplied
plain washers and nuts.
Connect the two BNC connectors
#
to the BNC
sockets
and
at the rear of the receiver.
Slide the receiver into a 19” rack.
Screw the rack mount “ears” tight.
Connect the two telescopic antennas
to the two
BNC sockets
"
.
Pull the telescopic antennas out and align them
upwards in a V-shape.
!
"
#
Summary of Contents for evolution wireless G2 300 IEM Series
Page 1: ...W300 Bedienungsanleitung ...
Page 46: ...W300 Instructions for use ...
Page 91: ...W300 Notice d emploi ...
Page 136: ...W300 Instrucciones para el uso ...