Sennheiser evolution wireless G2 300 IEM Series, Instructions For Use Manual, Page: 51 / 180

6
Overview of operating controls
EM 300 G2 rack-mount receiver
Operating controls Graphic display panel
Graphic display, backlit
/ rocker button (DOWN/UP), backlit
SET button, backlit
ON button, backlit
(serves as the ESC (cancel) key in the
operating menu)
Cable grip for power supply DC cable
DC socket for connection of mains unit (DC IN)
Audio output (AF OUT BAL),
XLR-3M socket, balanced
Audio output (AF OUT UNBAL),
¼” (6.3 mm) jack socket, unbalanced
Service interface (DATA)
Antenna input II (ANT II), BNC socket
Type plate
Antenna input I (ANT I), BNC socket
Display for the current channel bank “1...8, U”
Display for the current channel number “1...8”
“B.CH“ – abbreviation for channel Bank and
CHannel number
Alphanumeric display
“MHz“ – appears when the frequency is displayed
Diversity display
(antenna I or antenna II active)
“PILOT” display
(pilot tone evaluation is activated)
Level display for received RF signal “RF”
Level display for received audio signal “AF”,
with “PEAK“ warning
4-step transmitter battery status display
Lock mode icon
(lock mode is activated)
Note:
For further illustrations and examples of the different
standard displays, please refer to the section
“Selecting the standard display” on page 32.