![background image](http://html1.mh-extra.com/html/sennheiser/em-500-g3-02-09/em-500-g3-02-09_instruction-manual_1241700014.webp)
13
Using the radio microphone
To switch the radio microphone
off
:
If necessary, deactivate the lock mode (see page 14).
To switch the radio microphone on and to
deactivate the
RF signal on switch-on
(offline operation):
To
activate
the
RF signal
:
You can switch the radio microphone on and
deacti-
vate the RF signal on switch-on
. For more informa-
tion, see next section.
Keep the
ON
/
OFF
button
쐉
pressed until “
OFF
”
appears on the display panel. The red
ON
LED
쐎
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
쐉
will cancel your entry (ESC function)
and return you to the current standard display.
Keep the
ON
/
OFF
button pressed until “
RF Mute
On?
” appears on the display panel.
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
햵
is not displayed. When
the pilot tone function is activated on both radio
microphone and receiver, “
RF Mute
” appears on
the receiver’s display panel.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
Briefly press the
ON
/
OFF
button.
“
RF Mute Off?
” appears on the display panel.
Press the multi-function switch.
The transmission icon
햵
is displayed again.
ON/OFF
ON/OFF
MHz
542.625
ew500 G3
MUTE
P
AF
햵
ON/OFF
Summary of Contents for EM 500 G3 - 02-09
Page 1: ...SKM 500 Instruction manual...