![background image](http://html1.mh-extra.com/html/sennheiser/em-3731-ii-frequency-tables/em-3731-ii-frequency-tables_instruction-manual_1242736022.webp)
21
Using the receiver
왘
Position the transmitter’s infra-red interface at a max. distance of 5 cm
in front of the infra-red interface (sync)
The transfer starts automatically. During the transfer, the two blue
LEDs in the infra-red interface (sync)
flash and the backlighting of
the
sync
button
flashes green.
– After successful completion of the synchronization, the two blue
LEDs in the infra-red interface (sync)
stop flashing and the
sync
is backlit in
green
. The receiver’s frequency and name
are now also set on the transmitter and the transmission link is ready
for operation.
– If an error occurred during synchronization (e.g. the transmitter is
too far away from the receiver), the two blue LEDs in the infra-red
interface (sync)
stop flashing and the
sync
button
is backlit in
red
.
Identifying receivers using the “Wireless Systems
Manager” software (identifying function)
In multi-channel operation, it can be useful to identify the individual chan-
nels of the receivers via the “Wireless Systems Manager” software. The
identifying function shows you which channel is assigned to which
receiver.
왘
Start the identifying function as described in the instruction manual of
the “Wireless Systems Manger” software.
“
Identified
” appears on the status display of the identified receiver:
After 60 seconds, the text disappears and the current status display is
shown again.
To change to the current status display before the end of the 60 seconds:
왘
Press the
esc
button
esc
s
ave
syn
c
digital audio
processing
syn
c
5cm
<
300
100
30
10
1
5
10
PEA
µ
V
RF
%
A
B
SKM 5200-II
The infra-red interface of the SKM 5200-II hand-held transmitter is
located at the left-hand margin of the display. Position the trans-
mitter’s infra-red interface precisely in front of the receiver’s infra-
red interface (sync)
Identified
esc
s
ave
clock
syn
c
M
H
z
6.000
.01
BANK
CH
6
COM
AF
HD
P