![background image](http://html1.mh-extra.com/html/sennheiser/em-3731-ii-09-09/em-3731-ii-09-09_instruction-manual_1242733041.webp)
Adjustment tips for the operating menu
40
Setting a receiver to standby mode
You can set a receiver to standby mode and mute it. To do so, proceed as
follows:
왘
Change to the setting mode of the “
Standby
” menu.
The icon and the green backlighting of the
save
button
8
flash.
왘
Press the
save
button
8
.
The
esc
button
6
is backlit in red. The receiver is set to standby mode
and the display is switched off.
To end the standby mode:
왘
Press the jog dial
7
or the
esc
button
6
.
The display is switched on.
Loading the factory-preset default settings
Via the “
Reset
” menu, you can reset the current settings to the factory-
preset default settings.
왘
Change to the setting mode of the “
Reset
” menu.
The query “
Reset to factory defaults?
” appears. The green backlighting
of the
save
button
8
flashes.
왘
Press the
save
button
8
until the progress bar is complete.
All settings except for the booster supply voltage, the sampling rate at
the digital output and the network address are reset to the factory-
preset default settings. The display changes to the selection mode of
the operating menu.
Standby
OFF
Rese
000
MAC
0 1B
6 00
0 01
OFF
esc
s
ave
syn
c
digital audio
processing
syn
c
DEV
M
H
z
800.450
03.03
BANK
CH
COM
AF
The standby mode remains active even when you switch the
receiver off and on again.
Reset
000
andby
OFF
000
Reset to
factory defaults ?
esc
s
ave
syn
c
digital audio
processing
syn
c
DEV
M
H
z
776.000
01.01
BANK
CH
COM
AF